SS-11
While creating SS-11 we were guided by the motto - minimum size with
maximum functionality for full tube overdrive with the highest quality
components. The SS-11 is brother to the SS-20, but designed to be
different. While the SS-20 is the more aggressive "METAL" pedal, the
SS-11 was intended and manufactured for that famous CLASSIC tube driven
over saturated guitar tone that eveyone loves and craves.
Features of SS-11 Design:
- Fully tube-based 4 - stage overdrive channel with DUAL TUBE
design (2x12AX7 tubes) with high-voltage anode voltage (+300 V).
- Three separate channels: CLEAN / OVERDRIVE / LEAD
- Individual gain sensitivity and output level controls for clean and crunch/lead channels.
- TREBLE SHIFT toggle switch to enter bright mode for that added punch of high end.
- FX LOOP for external effects.
-
OUTPUT jack for connecting to both specialized guitar amplifiers with a
standard level of 0 dB (GUITAR AMP mode) and a CAB SIM MIXER out with a
standard level of -10dB and a guitar cabinet simulation.
- The preamp outputs are equipped with sophisticated solid-state buffers.
-
SS-11 incorporates new field-effect transistor-based guitar cabinet
impulse response emulator prossessing. Improved naturalness of sound
when connected to line input.
- Special attention was paid to
transistors anode power quality: preamp uses a specially designed
high-voltage transformer minimizing the penetration of impulse noises
into amplified signal.
Description of SS-11 Channels:
LEAD channel provides thick viscous sound for playing both chunky
rhythm parts and singing solos with excellent presence. TREBLE SHIFT
toggle to take your lead sound into bright mode, similar to the good
old "Treble Booster" pedals in the 80's that guitarists used to enhance
their solos.
OVERDRIVE channel features a more open structure of the sound. This is the SS-11's sweet spot! VERY tubey and saturated sounding, much like that of the classic tube amps of the 70's and 80's! Wide range of sensitivity adjustment results in the sound starting from light crunch to thick and bright lead channel-like sound. Natural tube tone. If you're looking for something other than that dull sounding solid-state OD or TS clone sound, then THIS IS IT.
CLEAN channel focuses on crystal clarity clean sound. Low, Mid, and High controls for tweaking your sound; as well as and TREBLE SHIFT toggle for adjusting high end response.
Samples:
1.
2.
3.
4.
5.
6.
7.
8.
9.
Download samples!
SPECIFICATIONS:
- Tubes: 12AX7 x 2
- Input Impedance Rear Panel: 1MOhm
- Input Sensitivity Rear Panel: -10dB
- Output Impedance: 10kOhm
- Power Voltage: 12vDC (-)center
- Power Consumption: 600mA or .6A